• Perfect for home use for ballet/dance and barre fitness.
• Wall mounted barres for ultimate stability
• Systems consist of 2 components: (1) Hardwood Barre and (2) Wall Mount Brackets with hardware.
• 1-1/2” diameter wood barre is natural, unfinished, sanded smooth and ready to use.
• 4’ and 5’ Barres are cut ½” shorter than stated length: 4’ = 47.5”, 5’=59.5” (3’ = 36”)
• Brackets are made of heavy gauge steel and are powder coated in a selection of colors.
• Distance from mounting surface to center of barre is approximately 6”
• Brackets may be placed anywhere along the barre length -typically 1”-6” in from the ends.
• Proudly Made in the USA
• Exclusive 10 Year Limited Warranty
• Supports 150 lbs. equally distributed when properly installed.
• Ballet barres are typically mounted at 42” top of barre to floor height for adults and 32” for children.
• Barres for barre fitness are typically mounted between 36” and 40” top of barre to floor height.
• Systems include all components and hardware needed for installation
into wood studs or a wood backer board. Wood screws are provided for
use underneath each bracket collar to secure the barres.
Most people use the wood barres unfinished as they are and let them naturally patina. We do not recommend staining or varnishing the barres because this may cause a sticky buildup or may wear and need to be re-finished. For a wood preserver, we do recommend using Danish oil or Linseed oil every few months. If needed, you may deep clean by lightly sanding the barres with 600 grit sandpaper.
Wall mounted barre brackets should be securely mounted to the wood studs of the wall or to a backer board. Hardware for mounting into wood comes provided with your wall brackets. If you have metal studs or a concrete wall, etc. you will need to purchase appropriate hardware from your local hardware or home improvement store. For this type of installation, we strongly recommend the use of a 1" x 6" backer board which is securely attached to the wall or to every stud. Then the wall brackets may be mounted to the backer board at the desired spacing. Never mount a barre into just the drywall as it can easily pull out.
You should not attempt to mount wall brackets directly onto a mirror as it will surely crack the mirror. You may have the mirror cut out for the brackets to mount directly into the wall studs but this can get costly. We recommend a better method of attaching a 1" x 6" backer board to the wall, securing it to the wall or to every stud, then mount the barre onto the backer board. Then you may install a mirror above and below this backer board. Another method is to install vertical mirrors leaving a small space between the mirrors to mount the brackets into the studs. When a barre cannot be mounted onto a wall due to mirrors or windows, a floor mounted barre is another option.